GATES AND DOORWAYS DRIVES

The DEIMOS drive enables universal use. It is, in particular, due to the extremely low position of the pinion and to the adjustable position of the complete drive with the base plate. An adjustable mechanical sliding clutch provides for protection against squeezing by the gate. Drive deblocking for manual opening may be performed very simply by means of a deblocking key that is normally supplied with the drive. The gate end run positions are controlled by electric and mechanical microswitches.

The kit includes

• 1x Deimos SR drive with embedded control unit and receiver with floating code
• 1x two-channel remote controller MITTO 2 with floating code
• 1x pair of photocells CELLULA 130
• 1x switch INTRO with key
• 1x safety beacon 230V with aerial

DIEIMOS BT KIT - power supply 24V, furthermore, also a separate motor in designs for both 230V and 24V can be ordered

The URANO BT drive offers sufficiently variable installation due to low pinion position, its compactness and thanks to adaptability of the height and depth. It is equipped with an electronic device ensuring against crushing. The emergency manual control may be activated simply by means of a dial with a lock with a devoted key. The stop is controlled by electric and mechanical position switches or by contactless sensors for very cold areas. The control unit is integrated or installed in a special box.

The kit includes

• 1x URANO BT drive with embedded control unit LEO D MA and receiver with floating code

The ICARO drive for sliding gates makes possible a very wide range of application due to its low positioned pinion and size. It is equipped with an electronic device against impact that ensures a high level of safety. The emergency control is activated by means of a button with a devoted key. The gate stop is controlled by electric and mechanical position switches, and contactless sensors for very cold territories are also an option. The control unit may be embedded or installed separately in a box.

The kit includes

• 1x ICARO MA drive with embedded control unit LEO D MA and receiver with floating code

Great versatility, thanks to arms that also make possible installations on large size pillars and opening by up to 120°. 24V voltage only.

The kit includes

• 1x VIRGO drive with embedded control unit and receiver with floating code
• 1x VIRGO SQ drive (VIRGO without the control unit)
• 1x two-channel remote controller MITTO 2 with floating code
• 1x pair of photocells CELLULA 130
• 1x switch INTRO with key
• 1x safety beacon 24V with aerial

Great versatility, thanks to arms that also make possible installations on large size pillars and opening by up to 125°. The IGEA BT KIT serves for automation of the wing gates with a wing length of up to 2.5 m and mass of up to 200 kg for residential use. 24V voltage kit only. A drive can be separately ordered for 230V, too.

The kit includes

• 2x IGEA BT drive
• 1x control unit LIBRA MA R with embedded receiver with floating code
• 1x two-channel remote controller MITTO 2 with floating code
• 1x pair of photocells CELLULA 130
• 1x switch INTRO with key
• 1x safety beacon 24V with aerial

The PHOBOS BT KIT serves for automation of the wing gates with a wing length of up to 1.8 m and mass of up to 250 kg for residential use.

The kit includes

• 2x PHOBOS BT L drive
• 1x control unit LIBRA MA R with embedded receiver with floating code
• 1x two-channel remote controller MITTO 2 with floating code
• 1x pair of photocells CELLULA 130
• 1x switch INTRO with key
• 1x safety beacon 24V with aerial

Drive for sliding gates with a maximum wing mass of 350 kg suitable for private use.

The kit includes

• 1 pc. electric and mechanical two-speed gear drive with embedded control unit
• 2 pc. remote radio 4-channel controllers
• 1 pair of safety photo-cells
• 1 pc. warning lamp with embedded aerial
• 1 pc. key switch with underlighting
• 3 pcs. deblocking keys
• 1 pc. fundament (anchoring) plate and corresponding anchoring bolts into concrete
• 2 pcs. position switch clamps

Electric and mechanical drive for a wing of max. width of 1.8 m and up to a wing mass of 200 kg

The kit includes

• 2 pcs. electric and mechanical two-speed gear drives including installation consoles
• 1 pc. control unit
• 2 pcs. radio remote 4-channel controller TX4 operating at the frequency of 433.92 MHz
• 1 pair of safety photo-cells PH1
• 1 pc. warning lamp FL1 with embedded aerial
• 1 pc. key switch KS1 with underlighting
• 3 pcs. deblocking key for the case of crisis situations
• and minute accessories for assembly

Private kit for swing garage doors with spring or counter-weight up to the gate width of 3m and height of 2.8 m and for section gate up to the width of 5m and height of 2.5 m

The kit includes

• 1 ceiling electric and mechanical gear drive with integrated control unit and lighting
• 1 guide rail 3m long with installed silent toothed belt
• 1 radio remote 4- controller channel TX4 (433.92 MHz)

For sliding gates weighing max. 500 kg for private use. In comparison with the sl1 drive, it masters a higher load and therefore is assigned for industrial applications.

The kit includes

• 1 pc. electric and mechanical two-speed gear drive with embedded control unit
• 2 pcs. radio remote 4- channel controllers TX4 (433.92 MHz)
• 1 pair of safety photo-cells PH1
• 1 pc. warning lamp FL1 with embedded aerial
• 1 pc. key switch KS1 with underlighting
• 3 pcs. deblocking keys
• 1 pc. fundament (anchoring) plate including anchoring bolts into concrete
• 2 pcs. position switch clamps
• + accessories for assembly

Electric and mechanical drive for a wing of max. width 4.5 m and up to a wing mass of 400 kg

The kit includes

• 2 pcs. electric and mechanical two-speed gear drives including installation consoles
• 1 pc. control unit
• 2 pcs. radio remote 4-channel controller TX4 operating at the frequency of 433.92 MHz
• 1 pair of safety photo-cells PH1
• 1 pc. warning lamp FL1 with embedded aerial
• 1 pc. key switch KS1 with underlighting
• 3 pcs. deblocking key for the case of crisis situations
• and minute accessories for assembly

Private kit for swing garage doors or section garage doors with spring or counter-weight up to the gate width of 5m and height of 3.5m.

The kit includes

• 1 ceiling electric and mechanical gear drive with integrated control unit and lighting
• 1 guide rail 3m long with installed silent toothed belt
• 1 radio remote 4- controller channel TX4 (433.92 MHz)

A drive kit for all types of single wing gates with the wing maximum length of 4.5m and maximum weight of 400 kg

The kit includes

• 1x drive with the installation console
• 1x backupable control unit
• 1x key switch
• 1 set of safety photo-cells ph1
• 1x warning lamp fl1
• 2x remote controller tx4
• 2x deblocking keys

The kit is suitable for light structures and for gates with strong pillars.

The kit includes

• 2 electric and mechanical two-speed gear drives
• 1 control unit
• 2 radio remote 4- channel controllers TX4 (433.92 MHz)
• 1 pair of safety photo-cells PH1
• 1 pcs of warning lamp FL1 with embedded aerial
• 1 key switch KS1 with underlighting
• 3 deblocking keys
• 2 fundament plates and console arms
• + accessories for assembly

Kit of drives that may be embedded into ground for wings of up to 1.80 m wide and with 1 wing weighing up to 200 kg

The kit includes

• 2x drives with fundament plates and consoles
• 1x backupable control unit
• 1x key switch
• 1 set of safety photo-cells ph1
• 1x warning lamp fl1
• 2x remote controller tx4